Go-power GP-SW1000 User Manual download pdf (Page 9)

GPSW-1000/2000/3000

___________________________________________________________

9



Solid Green: AC power OK

Flashing Green Power Saving Active

Fast Red Blink: Over voltage protection (OVP)

Slow Red Blink: Under voltage protection (UVP)

Intermittent Red Blink: Over temperature protection (OTP)

Solid Red: Overload protection (OLP)

Ventilation Ports:

Do not obstruct, allow at least one inch for airflow

Frequency:

Typical North American setting is 60 Hz. Set dip switch S4 to “0” for

50Hz and “1” for 60 Hz

Power Save:

Puts inverter to sleep until a load is present

3.2.2 Rearview (GPSW-1000)

Operation of the inverter without a proper ground connection

may result in an electrical safety hazard.

Remote Port:

Allows the customer to use any 2 wire switch to turn the inverter ON

and OFF. Ex. Toggle switch or light switch.

Ventilation port:

Do not obstruct, allow at least one inch for airflow.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Go-power GP-SW1000 User Manual Page 9