Go-power GP-175 User Manual download pdf (Page 4)

Go Power! Modified Sine Wave Inverter

Owner’s Manual

Go Power! Modified Sine Wave Inverter

Owner’s Manual

3. Features

3.1 Front view – GP-175

a) AC outlet:

Outlet sockets available: North America

b) ON/ OFF switch:

Leave in the OFF position during installation.

c) Power:

Lights green when GP-175 inverter is on.

d) Fault:

Lights red when fault has occurred.

3.1 Rear view – GP-175

a) Ventilation port:

Do not obstruct, allow at least 1 inch for air flow.

b) DC input plug:

Plugs into any car lighter.

4. Installation

4.1 Where to install

The power inverter should be installed in a location that meets the following

requirements:

a) Dry - Do not allow water to drip or splash on the inverter.

b) Cool - Ambient air temperature should be between 0°C and 40°C (the cooler the

better).

c) Ventilated - Allow at least two inches of clearance around the inverter for airflow.

Ensure the ventilation openings on the rear and bottom of the unit are not obstructed.

d) Safe - Do not install the inverter in the same compartment as batteries or in any

compartment capable of igniting flammable liquids such as gasoline.

e) Inverter should be located within 10 feet of the batteries.

4.2 Hook-up and testing

* Important: The DC car lighter input cable includes a 15 Amp fuse. Most North

American car lighters are rated between 10 - 15 Amps DC and are fused in the

automobile fuse box.

a) AC outlet

c) Power

d) Fault

b) ON/ OFF switch

a) Ventilation port

b) DC input plug

1 2 3 4

No comments

Go-power GP-175 User Manual Page 4